Sources laser
Fiber, Hybrid, Green
Use rate
Fully automatic
Adapted for high use rate
Laser sources
Fiber, DPSS
Marking area
From 65 x 65 mm to 205 x 205 From 2.56 x 2.56'' to 8.07 x 8.07 ''
Compatible Materials
Metals and plastics
The most complete laser station for permanent marking. From unit to small batch production to integration in a robotic cell. Compatible with Fiber, Hybrid, or Green source.
- TOUCH SCREEN
Just press the touch screen and the LW2 laser engraving machine enclosure takes care of the rest! The door closes automatically, the automated laser cutter is positioned at the right focus height, the marking is done in a few seconds and the door opens. This laser station does not require training. All you have to do is prepare your marking sheets and load them into the station via the USB port.
- COMPLETLY SAFE LASER MARKING SYSTEM
The safety of the operator is our priority. The laser marking station is certified as class 1 laser products, meeting all safety requirements, allowing use in unrestricted environments: integrated fail-safe relay, protective glass, door closure security, emergency stop, door fitted with sensors and anti-pinch system, integrated extraction and filtration solution to protect users from dust and smoke. Mechanic and electronics are fully protected in a sealed box. Integrated alarms and controls.
- FLEXIBLE MARKING STATION
Large marking area laser marking system with 3 sided door, marking of a large variety of parts, from small to big parts, from simple to complex shapes. LW2 laser engraving machine enclosure is compatible with all laser sources to offer you the possibility to mark on any type of material. We propose 2 software choices for the creation and control of your marking station to adapt to your needs and various and varied applications: Lasertrace & Laserstyle.
Technical Specifications
Motorized and programmable Z-axis
Part size up to 345mm high.
Spacious working area (L x W)
502 mm (19.7 in) x 477mm (18.7 in)
With mounting holes for accessories.
Automatic door
Opening / closing time: 2 sec
Certified Class 1, maximum safety
- Automatic door with sensors, anti-pinch and locking safety systems.
- Certified protective viewing glass (180 x 280 mm) for viewing markings without protective glasses.
- Emergency stop button.
General
Marking Capacity
Marking area max
205 x 205 mm (8.07 x 8.07 in)
Max object height
322 mm (12.7 in)
Object weight
25 kg (55 lbs)
The LW2 offers a number of setting aids on the touch screen for individual use:
- Easily find the focal length thanks to the focusing diodes. Simply join the two laser spots by adjusting the laser height with the motorized axis.
- The automated laser cutter itself to the focal length at the start. You only have to enter the part height directly on the screen.
- Thanks to the simulation mode, the station shows you the exact positioning of your future marking directly on the part.
LW2 is fully programmable to become an automated laser marking station:
- All the marking files are pre-loaded by the supervisor.
- The entire marking process is programmable: marking information, part height, time stamping, serialization, door opening/closing, I/O activation, etc...
- The LW2 can then switch to operator mode.
- No risk of errors, training free, just press a single button to start the next marking
The production mode allows you to go further in managing the traceability of your batches by connecting to your internal databases.
You thus connect the content of the marking to your databases and the history of the marked parts for an easier production process.
The industrial laser engraver is controlled remotely, thanks to dedicated and programmable I/Os.
It can be integrated into a robotic cell and associated with robots or cobots. The speed of door opening/closing has been optimized (2s) as well as the durability of our components to allow mass marking in a difficult environment.
This allows you to feel secure about integrating our industrial laser engraver on your production line. Gravotech offers you a ready-to-integrate package.
LW2 in Jewelry
Rotary device
In jewelry, most objects are cylindrical. By adding a rotary device to your LW2, you complete your offer in jewelry personalization.
Engrave on the outside and inside of rings.
Pin table
Create an air flow under your base material during laser cutting to prevent overheating. By using the cutting pin table, you raise your material by 2 cm and avoid heat deformation, beam returns and colour degradation.
50W laser
With LW2, combine the speed of galvo technology and the power of a 50 Watt laser source. Be comfortable when cutting and fast when engraving for maximum efficiency.
This laser engraver can handle more than 30 materials
| FIBER GALVO | HYBRID | GREEN | |
|---|---|---|---|
| ORGANICS | |||
| Ceramic | |||
| Electrical and medical ceramic | |||
| Leather | |||
| Paper, cardboard, cork | |||
| Rubber | |||
| Silicon | |||
| Wood, varnished wood | |||
| PLASTICS | |||
| ABS | |||
| Laminates | |||
| PA | |||
| PE, BET | |||
| PMMA, Acrylic | |||
| POM - PBT | |||
| PP | |||
| PC | |||
| Foam | |||
| METAL | |||
| Aluminum | |||
| Anodized Aluminum | |||
| Brass | |||
| Carbide | |||
| Coated metal | |||
| Copper | |||
| Gold, silver, nickel, platinum | |||
| Stainless steel | |||
| Steel | |||
| Titanium | |||
=
Marking / Etching
=
Cutting
=
Engraving / Deep marking
